Computer repair training

Computer repair and maintenance training. iMac Repair master course.

Start: 13 February
There are: 3 places
enroll in the course
up to 4 people
In employment

Who is this course for?

For beginners
For those who want to improve their skills
For those who are looking for work
For students
For those who want to open their own SC

What will you learn?

  • Acceptance of computers and monoblocks for repair. Filling in the repair order form.
  • Replacement of main units and assembly of the system unit
  • Cooling system maintenance
  • Diagnostics and testing using Victoria
  • Configure BIOS and reinstall the macOS operating system

What will you get after the training

Выдача сертификатов
Certificate — an official document of education
After completing the training, you receive a Certificate. Your advantage when applying for a service center or company
Help with employment
Owners and managers of service centers apply to Bgacenter if there are vacancies - phone repairman or service center receiver. Therefore, there is almost always a possibility of employment in the service centers of St. Petersburg, upon completion of training and successful certification.
Компенсация обучения
Tuition compensation, 13%
By completing any training program at bgacenter, you can receive a tax deduction for training

Training program


Initial diagnostics and customer service

  • Visual inspection of the PC case.
  • Does the computer turn on?
  • Diagnostics by AIDA64 program
  • Detection of system errors.
  • Determination of the configuration, the amount of RAM and the processor model.
  • Checking the file system for errors.
  • Filling in the repair order form.

Visual inspection of the computer system unit

Visual inspection of the computer system unit


Disassembly and assembly of computers

You can learn how to repair graphics adapters by going through a professional

  • Checking the correct installation of computer components.
  • Adjustment of the case for different components.
  • Disconnecting the power supply cables, motherboard, video card, data carrier (HDD and SSD) and optical drive.
  • Safely remove the video card.

You can learn how to repair graphics adapters by taking a professional
video card repair training

Disassembling a computer step by step

Disassembling a computer step by step


Motherboard components

  • Building a personal computer from scratch on Intel or AMD platforms.
  • Sampling of the motherboard by chipset.
  • Differences between chipsets.
  • Selection of optimal components to increase productivity.
  • The choice of high-quality components of the PC with a margin for the possibility of further upgrade.
  • Selection of the cooling system by CPU power.
  • Calculation of the required power reserve of the power supply for further performance improvement.

Components of a personal computer

Components of a personal computer



  • Identifying a faulty module on the motherboard using a post-card.
  • Decryption of BSoD (blue screen) errors.
  • Search for short circuits or breaks in power supply circuits.
  • Diagnostics and repair of ATX power supplies. While detecting malfunctions of the system unit that does not turn on, a known serviceable power supply is used.
  • Detection of the motherboard breakdown by the speaker’s sound signals (in the absence of a post-card).
  • Checking the buttons on the front surface of the case. Creating a bootable USB flash drive with an operating system.

Do-it-yourself troubleshooting

Do-it-yourself troubleshooting


Computer service

  • Cleaning the cooling system and replacing the thermal paste.
  • Service and repair of coolers.
  • Cleaning the inside of the case from dust.
  • Correction of defects in the case. Updating drivers.
  • Removal of obsolete and temporary files.
  • Cleaning the Windows registry.

PC maintenance

PC maintenance


PC repair

  • Repair of hardware faults.
  • Elimination of software failures using a bootable USB flash drive.
  • Recovery of the Windows bootloader with recovery tools and the command line.
  • Reinstalling the system.
  • Diagnostics of the hard disk with the Victoria program and subsequent replacement.
  • Checking the main power supplies, using a multimeter, the main voltages of the power supply and standby 5V and 3.3V.

PC recover

PC recoverК


BIOS setup

  • Working with UEFI
  • Unlock BIOS password
  • BIOS chip firmware programmer
  • Selection of analogs of chips
  • Updating the basic data input / output system by means of official software
  • Increasing frequencies through a CPU multiplier
  • RAM overclocking, voltage increasing


Windows setup

  • Data backup.
  • Create a system restore point.
  • Optimizing Windows for various tasks.
  • Installing drivers and necessary programs.
  • Remove malware using the uninstall tool.

Device manager window

Device manager window


Installing macOS

  • Installing macOS
  • Creating a bootable USB drive and installing mac OS.
  • Factory reset your iMac.
  • Replacing the hard drive with an SSD.
  • Working with the mac disk utility.

Creating a bootable mac OS

Creating a bootable mac OS


PC upgrade

On the computer repair course, you will learn how to select the following components:

  • power supply unit
  • processor by socket and chipset
  • RAM by compatibility and frequency
  • power and performance video cards
  • network and sound cards
  • Wi-Fi and Bluetooth modules
  • Modding and customizing the case of the system unit.
  • Stress tests using AIDA64, FurMark and 3Dmax.

Computer upgrade

Computer upgrade


Hard drive service

  • Partitioning a hard disk using Acronis Disk Director.
  • Creating a system backup.
  • Data recovery using Recuva or R-studio.
  • Repair a hard disk using the command line, with the chkdsk command.

HDD maintenance

HDD maintenance


Soldering circuit boards on a computer repair course

  • Soldering the power supply and PWM controller circuits on the motherboard.
  • Replacing damaged connectors for connecting peripheral devices.
  • Soldering and installing PCI slots on the bottom heater.
  • Bga soldering of the hub, south and north bridges. You will  learn how to solder the Charger chip and safely remove the compound at laptop repair training.

Course duration 32 часа

Sign up for a course or get a free consultation

Start: 13 February
There are: 3 places

Your result after training

During practical training in Bgacenter you will be able to independently:
  • Collect high-quality assemblies of personal computers, including for gaming
  • Diagnose different types of faults
  • Decrypt post codes
  • Recover operating systems
  • Take measurements with a multimeter
  • Identify faults on the board
  • Create system backups
  • Reflash BIOS with a programmer
  • Recover data
  • Solder microcircuits

Reviews of graduates

Курсы по ремонту компьютеров


г. Санкт-Петербург
Обучение ремонту компьютеров


г. Курск

Sign up for a training or get a free consultation

Start: 13 February
There are: 3 places
The cost of training
16900 rubles
23900 rubles
Study now, pay later!
Take the training in installments or on credit. The installment plan is available in equal installments for 4 and 6 months, without a down payment. You can find out the terms of the loan by filling out the form by clicking the button


I can disassemble and assemble system blocks, what else can I learn from the training?

In a computer repair course, you will also learn how to diagnose faults in power circuits. Upgrade the current build to improve performance. Master working algorithms for data recovery using specialized software Recuva.

Who runs computer repair training at your center? What experience does the teacher have?

The master of assembling and setting up personal computers has a lot of practical experience. From about 900 successful repairs of system units and laptops from different manufacturers. All teachers at Bgacenter are exclusively working masters, in their free time working in the service center. And repairing client devices. This is the only way to maintain a high level of personal knowledge and develop in the profession.

Will I get a tax refund for my personal computer course?

Yes. The only thing is that several conditions must be met. Including being a citizen of the Russian Federation and having a permanent official place of work. For more information on the conditions for obtaining compensation, you can read our blog in the article: How to get a tax deduction.

I plan to come to St. Petersburg in the near future for courses on repairing computers and video cards. Are you affiliated with a hostel? Can you recommend someone?

If you want to stay in a trusted hostel, write or call the administrator and you will be sent the contacts of several hotels. From which you can choose the option of accommodation that suits you. We only recommend hostels that are “verified” by Bgacenter alumni. One of them is the Friends hostel, phone number: +7 812 702 7711.

What forms of payment do you accept? Can I transfer by bank transfer for courses on repairing personal computers?

We accept cash and non-cash payments. Payment is made after the first free trial hour. Upon payment, a check is immediately issued for the entire amount deposited. You can also pay by bank transfer to the company’s current account, this is especially convenient for legal entities; paying for professional development of their employees. There is an opportunity to study in installments or get a loan. As you wish.

Do you conduct computer repair courses in Moscow?

In Moscow, teaching under this program is possible, provided that a group of 12 students is formed. In this case, the master of assembling and repairing personal computers leaves with the necessary equipment and tools to Moscow. We agree in advance with all students on the conditions (date, time, cost) of the upcoming courses.

What documents do you issue upon completion of training?

The certificate of the established form is issued after successful certification and passing the final test. This is an official document on education, which can be issued by companies operating officially, licensed to conduct educational activities.

Is it possible after your courses to get a job in the public sector, to service computers?

Absolutely in any field, knowledge of the maintenance and restoration of personal computers will be useful. Regardless of where to apply the acquired knowledge in a commercial company or at a state enterprise. And the competencies acquired in Bgacenter for home use will be very useful.

What programs do you recommend completing the computer repair course?

It depends on your goals, that is, what you want to take the courses for. We can recommend training in laptop repair. And also unparalleled – a program for debugging video cards. In each of the curricula, 80% of practical lessons.

I can solder with a hairdryer. I want to improve my experience in soldering bga chips. Is this course right for me?

If you have basic skills in hot air soldering stations, then this program is really for you. Since in practice, they master the soldering on the infrared soldering platform IK-650. You will learn how to solder not only bga microcircuits, but also plastic connectors such as PCI and PCI-E.

Check your level of knowledge
Take a short online test and test your skills
Rate this course
0 votes, average: 0.00 out of 50 votes, average: 0.00 out of 50 votes, average: 0.00 out of 50 votes, average: 0.00 out of 50 votes, average: 0.00 out of 5


0 Комментарий
Inline Feedbacks
View all comments

You may be interested

Start 6 February

Laptop Repair Training

Laptop diagnostics, multimeter measurements, oscilloscope – troubleshooting, laptop soldering

30% discount
Start 6 February

Soldering training

Board diagnostics, circuit reading, soldering of bga chips, cleaning of the compound, restoration of nickels and tracks

30% discount
Start 20 February

System Administrator Training

The training is applied in nature and is conducted on open source software running in a virtual environment.