iPhone XR Repair

Максим Исаев
Reading time: 3 min
793

Let’s go through all the steps in disassembling the iPhone XR in sequence. You will see how simple it is. You just need to have the right tools and the desire to work. Visit us for training courses at bgacenter and you will gain experience with all Apple products and more. Upon completion of training, you will receive an official certificate of education.

Before you repair iPhone XR, you need to prepare the following tools:

  • pentalobe screwdriver
  • Phillips screwdriver
  • 3-ray screwdriver
  • suction cup
  • plastic pick for separation of cases,
  • tweezers
  • anti-static paddle
Инструмент для работы
Инструмент для работы

iPhone XR repair

The disassembly process when repairing an iPhone XR is similar to disassembling an iPhone XS.

Unscrew the screws pentalobe, which are located at the bottom of the housing at the charging connector.

Ремонт iPhone XR
Ремонт iPhone XR
Отделяем дисплейный модуль
Отделяем дисплейный модуль

This is custom heading element

To remove the motherboard, unscrew the screws that secure the board in the case.

Выкручиваем винты
Выкручиваем винты
Извлекаем материнскую плату
Извлекаем материнскую плату

If all screws are unscrewed, the board is easily removed from the phone body.

Attention! Remember about the SIM card) It must be removed before removing the board.

плата легко изымается из корпуса
Плата легко изымается из корпуса

Taptic Engine (vibration motor)

The Tactic Engine module is located behind the motherboard. Unscrew the 3 screws and disconnect it from the connector, then remove the vibration motor from the housing with tweezers.

Taptic Engine (вибромотор)
Taptic Engine (вибромотор)

This is custom heading element

This device has a standard rectangular battery. Therefore, pulling on the “tongues” we stretch the tape. In order to prevent the sticky tape from tearing, you can use tweezers by wrapping sticky tape on it.

Извлекаем батарею
Извлекаем батарею

iPhone XR cameras

We remove the back (main) camera of the iPhone XP with tweezers.

Камеры iPhone XR
Камеры iPhone XR

Then we take out the TrueDepth module. This is a whole system of cameras designed for Face ID technology – a user’s face shape scanner.

TrueDepth в iPhone XR
TrueDepth в iPhone XR

The main purpose of the Face ID iPhone XR is to unlock the smartphone using the user’s face.

Face ID iPhone XR
Face ID iPhone XR

This is custom heading element

An induction charger coil is located on the lowermost layer of the back cover.

Индукционное зарядное устройство
Индукционное зарядное устройство

Conclusion

Процесс разбора при ремонте iPhone XR
Процесс разбора при ремонте iPhone XR

Phone XR is the flagship model of the Apple line. In order to completely disassemble or replace a faulty module, it is not necessary to give the device to a service center. Complete disassembly of the phone can be performed independently.

To do this, you need to have a minimum set of tools and be careful.

And remember, the material given in the article is introductory. You repair iPhone XR under your own responsibility.

We remind you that in our training center you can get knowledge of technical equipment and skills of repair of phones and tablets under the guidance of experienced technicians and without the risk of breaking someone else’s or your device. Come to our classes, we share valuable knowledge.

Rate the material
1 vote, average: 1.00 out of 51 vote, average: 1.00 out of 51 vote, average: 1.00 out of 51 vote, average: 1.00 out of 51 vote, average: 1.00 out of 5
Loading...

Comments

guest
0 Комментарий
Inline Feedbacks
View all comments