The iPhone X is one of the most frequently broken phones in the iPhone line. For proper diagnostics, it is useful to know the location of the connectors on the board. Detailed diagnostics on the main and most frequent malfunctions of the iPhone 10 are studied in the bga soldering course.
J4500 – connector for connecting the loop of the point projector
J4500 – connector for connecting the audio speaker loop and proximity sensor
J4200 – front-facing camera connector
J6400 – connector for connecting the system loop (charging and synchronization connector and microphone)
J4530 – connector for connecting an infrared camera
J5700 – connector for connecting the display module
J3200 – connector for connecting a loop of volume control buttons, vibration mode switch and induction charging
J3200 – connector for connecting the battery. Battery capacity iPhone X – 2716 mAh.
J3900 – connector for connecting the wide-angle lens of a dual camera.
J4300 – connector for connecting the loop of the power button, flash and microphone.
J4000 – connector for connecting the telephoto lens of a dual camera.
JUAT1_E – connector for connecting a Wi-Fi antenna
J5800 – touch screen connector
JLAT1_E – connector for connecting a loop with an antenna GSM
The iPhone X board consists of two parts. The upper and lower parts of the board are connected by soldering. The main part of the connectors is located on the upper “half”. Knowledge of the elements connected to the connectors is necessary for further diagnostics of the motherboard.